Cembre

Points of View Categories Applications Catalogues

Index

Related articles

Control and automation panels

The range of Cembre products related to supply demands for control and automation panels is particularly wide

Read more

Locomotive and carriages construction

The best selection to ensure maximum performance in the wiring of train carriages.

Read more

TERMINAL BLOCK MARKERS
CodeMG-CPM

MG-CPM for terminal block markers Weidmüller, ABB Entrelec, Wago, Allen Bradley, Conta-clip, Harting, Morsettitalia, Woertz, Connectwell; are availablein versions to suit the particular clip formats ofthe most widely used products. 

 

Depending on type, markers are presented as joined strips at a set or flexible pitch or as separate markers for convenient individual insertion on mixed pitch terminal block assemblies. 

 

MG-CPM markers provide an elevated mechanical robustness, high dimensional stability and are Halogen free. Printing a complete sheet of MG-CPM markers on MARKINGenius® thermal transfer printers takes around 10 seconds, while to optimise application time, additional data - job details, location, etc - may be printed on the stems. Partused sheets are easily accomodated to avoid wastage.

Certificates

2011/65/EU 2011/65/EU

Laboratory Test

CEI EN 60950-1

i INDELIBILITY

Information technology equipment - Safety
Part 1: General requirements
§ 1.7.11 Durability

Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with hexane.

After this test, the marking shall be legible; it shall not be possible to remove marking plates easily and they shall show no curling.

CEI EN 61010-1

i INDELIBILITY

Ed.2 equivalent to VDE 0411-1

Safety indications for electric devices for measurement, control and laboratory use
Part 1: General indications

This regulation requires that both material and the print shall withstand‚ cleaning with chemical agents commonly used in industry.

By rubbing manually by hand, without excessive pressure, for 30 seconds with a cloth soaked in the specific detergent or, if not specifi ed, Isopropyl Alcohol.

CEMBRE STANDARD

i INDELIBILITY

This test was created to simulate cleaning with chemical products commonly used on various surfaces.

By wiping with a cloth soaked in 95% Ethanol 30 times and making a visual inspection after every 10 passes.

UNI EN ISO 175

i EFFECT OF IMMERSION INLIQUID CHEMICALS

The standard specifies methods for exposing plastic test samples to liquid chemical agents and for determining changes in characteristics caused by this exposure. It includes the immersion test for 24 hours of the entire surface of the test sample and applies to all solid plastic materials, submitted in the form of printed or extruded materials, plates, pipes, bars or sheets with a thickness greater than 0.1 mm.

The test samples are completely immersed in a test liquid for a specified time and temperature.

Their characteristics are determined before immersion, after removal from the liquid and after drying.

The test methods specified are the following:

  • Changes in mass, dimensions and appearance, immediately after removal from the liquid and after drying
  • Change in the physical characteristics (mechanical, thermal, optical, etc.) immediately after removal from the liquid and after drying
  • The quantity of liquid absorbed

The liquids used by Cembre for this test are: Hydrochloric acid, Nitric acid, Hydrofluoric acid

DIN 30643

Technical characteristics Other characteristics

Material Polycarbonate
Halogen Free yes
Silicon free yes
UL94 class V0
Min operating temperature range -40 °C
Max operating temperature range 130 °C

Media gallery other media

TERMINAL BLOCK MARKERS MG-CPM

List of products

MG-CPM-01

Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-02

Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-03

Step of the clamp 5 mm
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-04

Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-05

Step of the clamp 5 mm
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-06

Step of the clamp 6 mm
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-07

Step of the clamp 5.2 mm
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-09

Step of the clamp 5÷6
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-10

Step of the clamp 5.5 mm
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-11

Step of the clamp 6.1 mm
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-12

Step of the clamp 5÷6
Geometric shape rectangular clip with rounded corners
Loading...

MG-CPM-13

Geometric shape rectangular clip with rounded corners
Loading...

notes and legal information

Cembre Via Serenissima, 9 - 25135 Brescia - ITALY

© Copyright 2017 Cembre S.p.A.
Partita IVA 00541390175